Language
Language
Personalized dental implant procedures are creating a breakthrough in the field of modern dentistry. With synchronization and personalization from the stage of placing the abutment to the restoration, this solution ensures safety, aesthetics and timeless sustainability.
The time to plant a dental implant ranges from 2-6 months.
The total time to implant an implant will be about 2-6 months depending on many factors such as the condition of the teeth, jawbone, the type of abutment chosen or the technique used.
Withpersonalized implant solution,you will have to visit the dentist about 4-5 times with the following stages:
After placing the implant, you will go home and wait for the dental implant to integrate stably in the bone. This is the longest stage, usually 2-6 months.
And below will be a specific personalized dental implant process to help you better visualize what you will have to do during the dental implant process, ensuring proactive travel time as well as getting the best Implant results.
In addition, you can refer to the information "How much does a dental implant cost per unit" to make the choice that best suits your needs.
The dental implant solution Digital Customized Technology has brought a breath of fresh air to the dental industry in general. So what makes the personalized dental implant process so special? Below is a 7-step process, performed in 4-5 appointments:
Step 1: Collect data, plan and produce Guideline
Data collection is a necessary step in the DCT dental implant process.
First, the patient will undergo a CT Conebeam and Dental Scanning, taking pictures inside and outside the mouth. The collected data will be input into Exocad software to create treatment plans. With the ability to analyze forces, Exocad allows doctors to accurately calculate the position and direction of implant placement.
After completing the planning process on the software, a guide will be produced for the purpose of placing the implant accurately, avoiding damage to neighboring structures, damage to the lower dental nerve canal or maxillary sinus... At the same time, the periodontal tissue is also re-established in an ideal state, and a personalized anatomical healing post will be produced with guide trough.
Step 2: Place the implant post
Once the guide and healing abutment have been personalized, the patient will be scheduled to visit the dentist for implant placement surgery. Normally, the personalized dental implant procedure with the support of a guide tray will take place quickly and gently, only taking about 10 minutes/post.
This is the second appointment, usually about 3 days (36 hours) after the first appointment.
Step 3: Place the personalized healing post
The personalized healing post is placed during the implant placement.
Most personalized healing posts will be placed immediately after the root implant. implant. This is also the great advantage of personalized dental implant solutions compared to traditional dental implants.
With traditional dental implants, the patient may have to have the healing post placed in stage 2, meaning the patient will need to go to the dentist for another appointment, usually 2-4 months after the root is placed. This not only costs time but also requires multiple surgeries.
Step 4: Scanning the implant position and periodontal tissue
After about 2 to 4 months, when the implant has stabilized in the jawbone, the patient will return to the clinic. In this session, the doctor uses a scanning machine to mark the entire tooth, periodontal tissue, bite and implant root position to ensure absolute accuracy.
And in the personalized dental implant process Digital Customized Technology, manual impressions will not be able to meet the requirements and Scanning is required. Why is that? By Digital Customized Technology It is necessary to copy in detail not only the teeth, periodontal tissue but also the bite and implant root position.
This is the third appointment in the dental implant process, the Scan to obtain data will take about 30 minutes.
Step 5: Design a personalized restoration abutment and porcelain tooth
Personalized restoration abutment is a mandatory process, acting as a real tooth base.
Scan data will be recorded and once again entered into the software Exocad, combined with previous anthropometric data, the doctor will design personalized prosthetic posts and porcelain teeth for each patient.
Why personalize design? The reason is that each person will have a different jaw and tooth structure, so personalized design helps the restoration abutment and porcelain tooth fit perfectly, ensuring harmony in aesthetics, bite and the biology of tissue around the teeth.
Step 6: Crafting the restoration abutment and personalized porcelain tooth
After completing the design process, the data will be sent to the laboratory to produce the restoration abutment and porcelain tooth.
The restoration abutment is made of pure titanium. or monolithic zirconia. Meanwhile, the porcelain teeth will be made from multi-layer monolithic zirconia through CAM technology.
Step 7: Install the prosthetic abutment and personalized ceramic tooth
Install the porcelain tooth on the prosthetic abutment, ensuring the same aesthetics as a real tooth.
After the restoration and porcelain tooth are finished, the doctor will make an appointment for the patient to come in to place the personalized restoration abutment and install the personalized ceramic tooth.
This is the 4th appointment, usually every other day. Scanning appointment takes about 5 days. At this point, if you still don't understand clearly What is implant placement? Please ask your doctor for more detailed advice!
In clinical practice, the personalized dental implant process is carried out in 4 steps as follows:
Step 1: Place the implant using the surgical guide
Instead of relying on experience, placing implant posts relies on Freehand, a personalized dental implant solution using a previously designed surgical guide, which ensures accuracy, safety, and avoids risks during the post placement process.
Step 2: Place a personalized healing abutment to shape the periodontal tissue
As mentioned, the personalized healing abutment will be placed during the implant placement. However, if the jaw bone is lacking or the gums do not have enough volume, you will have to wait 2 months for the implant to be integrated before the abutment can be placed to heal.
Step 3: Scan periodontal tissue, bite and implant to create personalized restorations and porcelain teeth
Scanning has the ability to accurately copy periodontal tissue structure, bite...
The scan will be performed after the implant has stabilized, usually about 2 months after placement.
Unlike the manual impression method of traditional dental implants, Digital Customized Technology Using Scanning technology to accurately copy the implant position, shape and structure of periodontal tissue, and the patient's bite onto virtual reality design software.
Step 4: Place the personalized restoration abutment and attach the porcelain tooth
After scanning, the data is transferred to the design center, where the personalized prosthetic abutment will be manufactured.
Once completed, the prosthetic abutment will be attached to the patient's mouth, ensuring a close fit to the periodontal tissue structure. Porcelain teeth are also designed and attached to personalized restorations at this step.
The personalized dental implant process is the optimal solution to help overcome all cases of lost teeth, ensuring safety, aesthetics, and sustainability. With this synchronous solution, Digital Customized Technology personalized dental implants also promises to bring you one-time dental implants that can be used for life. If you are interested in personalized dental implants, please contact Lac Viet Intech dentistry for detailed advice and support.
News on the same topic
Related questions
Featured news
Sign up for consultation
Partner of Lac Viet Intech Dental Clinic
